FOR IMMEDIATE RELEASE – Remove Plastic Wad Effortlessly
IOSSO Products
1485 Lively Blvd.
Elk Grove, IL 60007
Phone: 847-437-8400
iossoproducts@iosso.com
www.iosso.com
Contact: Marianne Iosso
marianne@iosso.com
One of the problems associated with Shotgun shooting is the plastic wad residue left from the shotgun shell. The plastic becomes imbedded in the bore making it very difficult to clean. Iosso Products has a foolproof easy solution to clean plastic wad and all other fouling in one-step!!
The combination of the Iosso Bore Cleaner with the Eliminator Brush will remove plastic wad, copper & lead fouling as well as the nasty carbon burn in one-step. The Iosso Bore Cleaner is applied to the Eliminator Brush. The brush is run down the bore 8 to 10 times. Run clean patches down until one remains clean. Upon inspection, all fouling will be removed. For extremely heavily fouled conditions, this may need to be repeated. The Eliminator Brush is a thick stiff nylon composite fiber which fits the bore very snug. The brush holds its shape well and may be used many times before becoming worn. It is made blue in color so that it will not be mistaken for any other brush.
This method allows for cleaning to be done in 15 minutes or less, with no smell and no running or splattering of fluids.
Cleaning done this effortlessly can be accomplished at a match, between rounds or in field while hunting and accuracy is improved.
For further information contact IOSSO Products, 1485 Lively Blvd., Elk Grove, IL 60007, Phone: 847-437-8400 www.iosso.com
FOR IMMEDIATE RELEASE
New AR-15 Cleaning Brushes Grab All Fouling!!!
Cleaning an AR-15 has never been an easy task. There were no brushes that fit correctly for complete cleaning . . . until now. Wrapping a patch around a brush to make it fit and using tools to scrape away the fouling is not foolproof. A new brush kit designed for the AR-15 is now available to take all the guesswork out of cleaning.
These new brushes made by Iosso Products are superior because they are fitted to tolerance for precise cleaning.The kit contains four brushes.The upper receiver brush, the chamber brush, the bolt
carrier brush and a bore brush. The upper receiver brush fits the AR-15 and the AR-10. These brushes are sized so that they fit snugly into the areas to be cleaned. They are made out of a distinctive blue fiber which is thick and stiff that holds its shape well. They may be used several times before becoming worn. There is a kit made for the AR-10 also. When used with the Iosso Bore Cleaner and Iosso Gun Oil it will remove nasty carbon burn and grabs all other fouling. The kits retail for $16.95 each. For further information contact IOSSO Products, 1485 Lively Blvd. Elk Grove, IL 60007, Phone: 847-437-8400, www.iosso.com